Electric Insect Killer Use instructions
Do not place the appliance into barns, stables, garages or similar.
This appliance is only for internal use, that do not intend into barns, stables, garages or
similar.
INSTRUCTION FOR USE
Place the appliance following carefully the instructions mentioned above.
Plug the supply cord in the supply power.
The appliance will automatically switch on.
The appliance light and the insects will be naturally attracted by the UV light, they will fly to the elec-
tric metallic grid and will be fulminated instantaneously. The insects will fall into the slide base plate.
The appliance's light is completely safe for humans being.
DESCRIPTION Fig.1
1 – Fixing chain
2 – External grid
3 – 1 UV tube
4 – Electric metallic grid
5 – Slide base plate
CLEANING
Before cleaning, switch off the appliance and unplug the supply cord.
Remove the slide base plate turning it clockwise down and empty it.
If used for a long time it is recommended to clean the appliance twice a month.
Replace the slide plate, turning clockwise and fix it.
The plastic external parts can be cleaned with a soft cloth lightly wet.
Do not use thinners, detergents for plastic, glass or other, that could damage the appliance.
Do not liquids into the appliance.
Do not use metallic products to clean the appliance.
DONNEES TECHNIQUES
Power : 9W
Plug supply : 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
9
EN