Technivorm MOCCAMASTER Manual De Instrucciones página 9

e. Place the filter holder on the bracket and position the outlet
arm above the centre of the filter holder.
Now follow the user instructions for coffee makers with a glass jug or
a thermos jug
Coffee makers with a glass jug:
f. Place the glass jug, including the lid, on the hot plate. The glass
jug will be quickly preheated by the hot plate.
g. Select: This machine has two settings so you can choose a half
jug or a full jug. On the half-jug setting, the water is pumped
through more slowly for a longer coffee extraction time and a
more intense flavour.
NB: Of course, you can also use this setting for a whole jug.
We also recommend the 'half-jug' setting when using decaf-
feinated coffee or softened water, in order to prevent the filter
holder from overflowing.
h. Set the on/off switch to the 'on' setting and the brewing process
will quickly begin.
i. Brewing and hotplate are separate systems. If the water res-
ervoir is empty, the brewing process automatically stops. The
hot plate stays at the correct temperature for 40 minutes after
the start of the brewing process. After 40 minutes, the machine
automatically shuts off. If the coffee jug is empty before then,
switch off the machine yourself.
Coffee makers with a thermos jug:
f. Before making coffee, we recommend that you first rinse the
thermos jug with hot water to minimise heat loss.
g. Use the mixing lid when making coffee. Place the thermos jug
on the footplate so that the jug presses in the white button on
the inside of the base fully. The orange light comes on when the
thermos jug is correctly placed against the white button.
h. Set the on/off switch to the 'on' setting and the brewing process
will quickly begin. If the water reservoir is empty, the brewing
process automatically stops. You can turn off the machine
yourself. As the light uses very little electricity, it is not a problem
if you forget to do so.
Coffee tastes best immediately after it is brewed!
9