D-Link DIR-880L Guía De Instalación Rápida página 4

TROUbLEShOOTING
setuP AnD ConFiGurAtion ProbleMs
1. hOW DO I CONFIGURE my DIR-880L ROUTER mANUALLy?
- connect your pc to the router using an ethernet cable.
- open a web browser and enter the address 'http://dlinkrouter.local.' (or '192.168.0.1').
- the router password should be left blank by default.
- If you have changed the password and can not remember it, reset the router to return to an empty
password field.
2. hOW DO I RESET my DIR-880L ROUTER TO FACTORy DEFAULT SETTINGS?
- ensure the router is powered on.
- press and hold the reset button at the bottom of the device for 5 seconds.
Note: Resetting the router to factory default will erase the current configuration settings.
to re-configure your settings, log into the router as outlined in question 1, then run the setup wizard.
3. hOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I hAVE FORGOTTEN my
WI-FI NAmE (SSID) OR WI-FI PASSWORD?
- For each device that needs to connect to the router wirelessly, you will need to ensure you use the
correct Wi-Fi name (ssId) and Wi-Fi password.
- use the web-based user interface (as described in question 1 above) to check or configure your
wireless settings.
- make sure you write down these settings so that you can enter them for each wirelessly connected
device. the back of this document features an area to record this important information.
4. Why CAN'T I GET AN INTERNET CONNECTION?
- For adsl users, please contact your Isp to make sure the service has been enabled/connected
by your Isp and that your Isp username and password is correct.
5. Why CAN'T I REGISTER my DEVICE WITh myDLINK?
- If you experience issues registering this router with your mydlink account, try performing a hard
reset by using an unfolded paperclip to press and hold the reset button for 5 seconds while the
router is powered on. this may be necessary if you purchased an open box or resold unit.
4
Dir-880l