Tripp-Lite SmartRack SRFAN1U Manual Del Propietário página 3

Installation
1
Identify the desired 1U (SRFAN1U) or 3U (SRFAN3U/SRXFAN3U) space within a rack enclosure to mount the fan unit.
1
2
Align the mounting ears located on the front panel of the fan unit with the rack enclosure's front vertical mounting holes.
Note: The fan unit's fans will push air toward the top or through the front of the enclosure.
2
3
Attach and secure the fan unit to the rack enclosure with user-supplied hardware.
Note: The user must determine the fitness of hardware before mounting. If hardware and procedures are not suitable for your application, contact the
manufacturer of your rack or rack enclosure for a solution.
3
4
SRFAN1U and SRFAN3U Models: Plug the input cable into a power source that supports a NEMA 5-15P plug, such as a wall outlet,
power distribution unit (PDU) or uninterruptable power supply (UPS).
SRXFAN3U Model: With a user-supplied power cord, connect the fan unit's C14 inlet to an outlet that supports the local power source.
4
3