Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

www.qfxusa.com
PBX-3010BT
120V-240V
60W RMS
User Manual for PBX-3010BT Portable Speaker

Publicidad

loading

Resumen de contenidos para QFX PBX-3010BT

  • Página 1 PBX-3010BT 120V-240V 60W RMS User Manual for PBX-3010BT Portable Speaker...
  • Página 2 Introduction Congratulations and thank you for your purchase of this QFX Powered Portable PA System with wired microphone, USB & SD Card , Bluetooth inputs. To get the most from your system, we recommend you review all the information provided in this instruction Manual.
  • Página 3 PBX-3010BT PBX-3010BT REAR PANEL...
  • Página 4 PBX-3010BT PBX-3010BT FRONT PANEL 1.AUX 1 Input (RCA): The RCA Input is designed to connect directly to a CD/DVD/TV or any other stereo level audio device. Please note that there are two LINE Inputs, RCA and 1/8”. If both the RCA and 1/8”inputs are connected the unit is automatically play from the 1/8”...
  • Página 5 PBX-3010BT PBX-3010BT FRONT PANEL 1. Previous Folder Button: Press this button to move to the previous folder on USB flash drive or SD card. 2. Previous Track Button: When on USB/SD mode, short press this button to move to the previous track for USB/SD.
  • Página 6 Press next track button or previous track button to move up or down. Press PLAY button to enter the menu. PBX-3010BT DISPLAY USB/SD MODE 1. Input Mode: The input mode will display here. When a USB flash drive / SD Card is inserted into the USB/SD input, the unit will automatically switch to USB/SD mode and begin playing .
  • Página 7 PBX-3010BT PBX-3010BT DISPLAY SYSTEM SETTINGS Select the mode of SYSTEM SETTINGS, 7 submenu from System setting will display. 9. System time: You can adjust the right time for the unit. After adjust the time, display will show the time only when not in use.
  • Página 8 PBX-3010BT PBX-3010BT TOP PANEL device slot USB charger Device slot is available for putting any device such as mobile or tablet PC. USB Charger:Any device such as mobile or tablet PC can charge with che USB cable...
  • Página 9 PBX-3010BT PBX-3010BT BATTERY 1. The PBX-3010BT is a battery powered PA loudspeaker. Be sure that you have completely charged the battery prior to first use to maximize the battery's lifespan. The PBX-3010BT takes approximately 8 hours to fully charge. The PBX-3010BT will automatically begin charging once the power cord is connected to a power source and Power Switch is set to ON.
  • Página 10 PBX-3010BT PBX-3010BT TELEMANDO A DISTANCIA 1. STANDBY: Press standby button to make the unit to be standby mode. 2. Input Mode Button: Press this button to toggle between the various inputs (LINE, USB, SD, FM). 3. Mute: Press this button to mute the track for USB/SD.
  • Página 11: Introducción

    INTRODUCCIÓN Felicidades y agradecemos que usted compre este altavoz portátil QFX con micrófono con cable, entradas USB y tarjeta SD y Bluetooth . Para obtener mayor informaciñon de su sistema, le recomendamos que lea todas las informaciones proporcionadas e.
  • Página 12 PBX-3010BT PBX-3010BT VERDADERO PANNEL -11-...
  • Página 13 PBX-3010BT PBX-3010BT VERDADERO PANNEL 1.AUX1 de entrada (RCA): La entrada RCA está diseñado para conectarse directamente a un CD / DVD / TV o cualquier dispositivo estéreo .Tenga en cuenta que hay dos entradas de línea, RCA y 1/8 ". Si la RCA y 1/8 están conectados, el aparato se reproducirá automáticamente la 1/8"...
  • Página 14 PBX-3010BT PBX-3010BT PANEL FRONTAL 1. El botón del archivo arriba:Click este botón para mover al drive USB flash o archivo arriba del tarjeta SD. 2.Botón de pista anterior: Cuando está en el mode de USB / SD, pulse brevemente este botón para ir a la pista anterior de USB / SD.
  • Página 15 PBX-3010BT PBX-3010BT EL MENÚ DE MONITOR 1 2 3 4 5 6 Conecta el drive USB flash o la tarjeta SD al altavoz cuando el altavoz está abierto. Click el botón de modo entrado en el panel posterior,puede entrar al menú primero.
  • Página 16 Volumen de la despertador:Puede ajustar el volumen de la despertador,que es el volumen primero. 13. El contraste:Ajusta el contraste de la pantalla. 14. La versión de Firmwave:Es la versión del programa. PBX-3010BT LINE MODE MONITOR Selecciona ¨AUX¨del menú primero para cambiar el modo de RCA. PBX-3010BT MICRÓFONO Microphone ON/OFF 1.
  • Página 17 PBX-3010BT PBX-3010BT BATERÍA Ranura del dispositivo cargador USB Ranura del dispositivo está disponible para poner cualquier dispositivo, como móvil o tablet PC. Cargador USB: Cualquier dispositivo, como móvil o tablet PC puede cargar con el cable USB. -16-...
  • Página 18 PBX-3010BT PBX-3010BT BATERÍA 1. PBX-3010BT es una batería abastecida para altavoz PA. Asegúrese de que haya cargado completamente la batería antes del primer uso con el fin de prolongar la su máxima vida. PBX-3010BT Necesita arededor de 8 horas para cargarse completamente. PBX-3010BT comenzará...
  • Página 19 PBX-3010BT PBX-3010BT LEMANDO A DISTANCIA 1.STANDBY: Pulse el botón de modo de espera para que el aparato esté el modo de espera. 2. Botón de modo de entrada: Pulse este botón para cambiar entre las distintas entradas (línea, USB, SD, FM).