Battery Replacement; Customer Service - Klein Tools DTL302 Manual De Instrucciones

Termómetro digital

Ocultar thumbs

Contenido

página de 37

/ 37
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

Always use a fresh replacement battery of the speciﬁ ed size and type.

Immediately remove the old or weak battery from the meter and dispose

of it in accordance with your local disposal regulations. Old or defective

batteries can leak chemicals that corrode electronic circuits.

WARNING!

To avoid electric shock, be sure to turn off the meter's power and

disconnect thermocouples from any equipment before you remove or

install batteries. Under NO circumstance should you expose batteries to

extreme heat or fire as they may explode and cause injury. To install a

new battery, follow these procedures:

• Remove the screws from the battery compartment cover on

the back of the meter and lift the cover (Fig 1).

• Remove and discard the old batteries. Always dispose of old

• batteries promptly in a manner consistent with local disposal

regulations.

• Place a fresh batteries in the compartment.

• NOTE: If you do not plan to use the meter for a month or

more, remove the battery and store it in an area that won't be

damaged by a leaking battery.

• Reattach the battery compartment cover to the meter and

reinstall the screws.

This product is warranted to be free from defects in materials and work-

manship for a period of two years from the date of purchase. During this

warranty period, Klein Tools has the option to repair or replace or refund

the purchase price of any unit which fails to conform to this warranty

under normal use and service. This warranty does not cover dam-

age which occurs in shipment or failure which results from alteration,

tampering, accident, misuse, abuse, neglect, or improper maintenance.

Batteries and damage resulting from failed batteries are not covered by

warranty. A purchase receipt or other proof of original purchase date will

be required before warranty repairs will be rendered. Any implied war-

ranties, including but not limited to implied warranties of merchantability

and ﬁ tness for a particular purpose, are limited to the express warranty.

Klein Tools shall not be liable for loss of use of the instrument or other

incidental or consequential damages, expenses, or economic loss, or for

any claim or claims for such damage, expenses or economic loss. Some

states or countries laws vary, so the above limitations or exclusions may

not apply to you. This warranty gives you speciﬁ c legal rights, and you

may also have other rights which vary from state to state. If your Klein

product requires repair or for information on how to exercise your rights

under the terms of this warranty, please contact Klein Tools at 1-800-

553-4676.

Turn instrument off and disconnect any cables. Clean the instrument by

using a damp cloth. Do not use abrasive cleaners or solvents.

Remove the batteries when instrument is not in use for a prolonged

period of time. Do not expose to high temperatures or humidity. After a

period of storage in extreme conditions exceeding the limits mentioned

in the Speciﬁ cations section, allow the instrument to return to normal

operating conditions before using it.

Caution:

accessories shall be subject to a separate collection and

correct disposal.

KLEIN TOOLS, INC.