How To Use - Hamilton Beach SodaStation Manual De Instrucciones

How to Use

1
Turn CO release knob counter-
2
clockwise (when viewed from
above) to unlock the cartridge
door. Press door to open.
MAX Fill Level
MIN Fill Level
4
Fill water up to MAX Fill Level
for Lighter Carbonation. For best
carbonation of soda, fill water to
MIN Fill Level.
4
840238400 ENv02.indd 4 840238400 ENv02.indd 4
2
Insert CO cartridge with the
2
narrow end pointing down. Swing
door closed and press to ensure it
is latched.
5
Place carbonating unit onto bottle
and turn clockwise until it clicks
into place. CAUTION! Carbonating
unit may project off bottle if not
fully rotated and locked in place.
NOTE: Only use SodaStation™ Hamilton Beach
bottles. Never carbonate if bottle is empty, not filled to the MIN Fill
Level, or not fully attached.
3
Use VERY COLD (33°–42°F
[0.5°–5.5°C]) refrigerated water.
6
Turn carbonation adjustment dial
clockwise for more carbonation
and counterclockwise for less
carbonation.
CO cartridges and
®
2
WARNING! Explosion Hazard:
Dried flavor syrups can clog the
carbonation nozzle. Add flavors
after carbonation only. Do not
reinsert carbonating unit into
bottle with water after syrup has
been added.
Turn CO release knob quickly
2
clockwise until it stops to release
gas into the bottle. If no CO gas
2
is discharged into the bottle (if
no bubbles appear), press the
pressure release button to relieve
any trapped pressure in the
carbonating unit. DO NOT attempt
to remove the carbonating unit
from the bottle. Contact Hamilton
Beach for repair or replacement.
11/22/13 9:55 AM 11/22/13 9:55 AM