Samsung VS15T70 Serie Manual Del Usuario página 30

Problems
Cleaning is finished but
small dust particles come
out of the brush.
Vacuum cleaner stops
operation during
cleaning.
Static electricity occurs
when cleaning a thick
and soft mat.
30 English
• After cleaning, operate the vacuum for 10 seconds or more on
the MAX setting to suction up the small dust particles.
• The vacuum cleaner's motor will shut off to prevent overheating:
– When the vacuum operates with a full dustbin.
– When the vacuum operates with suction part or brush clogged.
– When the Extension Crevice Tool is used for long hours.
• After correcting the cause of the problem, turn the product
on again. (This case may differ depending on the ambient
temperature.)
• Some types of mats such as a (childcare center mat or a noise
prevention mat for between floors, etc.) may cause static
electricity.
– Move the brush on a normal floor for a while and clean again.
This should get rid of the static electricity.
Solutions