Installing the LC-GMRC-05
With the key in the off position:
• Connect the LC-GMRC-05 harness into the interface.
• Connect the LC-GMRC-05 harness to the vehicle.
®
LC-GMRC-05
Initializing the LC-GMRC-05
Attention: If the interface loses power for any reason, the following steps
will need to be performed again.
• Turn the key (or push-to-start button) to the ignition position and wait
until the radio comes on.
Note: If the radio does not come on within 60 seconds, turn the key
to the off position, disconnect the interface, check all connections,
reconnect the interface, and then try again.
• Turn the key to the off position, and then to the accessory position.
Test all functions of the installation for proper operation, before
reassembling the dash.
3