Publicidad
General safety provisions
and general informations
This document provides all the information neces
sary to perform the installation of Aircare AFL as far
as windows fitter is concerned.
Please observe these general safety provisions, in
cluding the warnings, comments and instructions
contained in this operation and mainteinance manual.
Failure to follow the general safety provisions, war
nings, comments and instructions can result in injury
and/or dama ge to persons and/or things, including the
product Aircare AFL unit whose Thesan S.p.A. it will
not respond in any way.
Aircare AFL can only be installed, connected and
maintained by experienced qualified electricians or
window installers having the proper skills as a result
of specific training or professional expertise and
who can guarantee that the works will be perfor
med correctly.
Aircare AFL must be installed in compliance with
regu lations and standards regarding construction,
windows and doors, and electric systems currently
in force whe re the unit is to be installed.
Check components integrity before performing the
installation, if you have a doubt consult your dealer.
During the installation of Aircare AFL should be
already prepared the corrugated plastic for the pas
sage of electric cables. If there are already present
the electrical wire, disconnect the power supply du
ring all installation operations.
Near Aircare AFL should not be placed heat
sources with temperatures above 50°C.
Make sure that the air inlet is positioned so that it
will not take in smoke or other exhausts.
Do not to install Aircare AFL near sources of oil or
fat (for example, griddles or grills for cooking food).
If Aircare AFL serves a room containing equipment
fed by flammable substances, the installer must
make sure that there is an adequate turnover of air
for all equipment installed.
Check that the air inlet created by Aircare AFL
does not affect appliances that burn flammable
substances.
Do not cover or insert any foreign objects into the
air inlets or outlets while the Aircare AFL is running.
Do not use Aircare AFL in such environments as
la boratories/factories where hazardous gases such
as alkaline gases are used, or in places which may
present fumes of organic solvents, varnishes, or
other corrosive substances.
Never disconnect Aircare AFL operation by
pulling on the electrical wires; always use the ON/
OFF button or the re mote control.
Never make any modifications to the Aircare AFL.
Aircare AFL must not be opened and dismantled
without suitable tools; Only qualified personnel —
who have acquired the necessary skills through
special training or professional activity — can
guarantee proper execution of the works and
only they can handle internal components of the
Aircare AFL unit, including the fan.
Class I equipment.
The grounding must be ensured by connecting
the appropriate cable grounding.
Aircare AFL must not operate without the filters, pe
nalty invalidation of warranty claims.
3
Publicidad
