R&S SLG
1.4 Notes on the Operating System and Firmware
The instrument uses a Linux operating system. Access is not provided to the operating
system but rather to a webserver through which a user can configure the instrument's
network settings. More detailed information is provided in chapter 2 of the User
Manual.
1.4.1 Installing the Software
●
Only software authorized by Rohde & Schwarz for use in the instrument may be
installed. In case of doubt, please contact your local Rohde & Schwarz
representative.
●
Changes to the system are only permissible in agreement with Rohde & Schwarz.
●
Updating the operating system, e.g. installing a service pack, is not allowed without
permission.
Otherwise, the stability and performance of the system may be impaired. Rohde &
Schwarz shall not assume any liability for faults caused by impermissible
manipulations of the system.
Getting Started 2116.9035.02 - 07
Putting the Instrument into Operation
Notes on the Operating System and Firmware
11