Specifications; Preparing To Use The Jump Starter; Jump Starter Location - MAC TOOLS MTPROG Manual Del Usaurio

SPECIFICATIONS

AC charging socket
12V DC power outlet
Heavy-duty battery clamps
Internal
Model #
Battery Type
Sealed,
MTPROG maintenance-free AGM
lead-acid
Charger
Model #
Input
100-240V,
MTPROG 50/60 Hz,
0.7 A max.

PREPARING TO USE THE JUMP STARTER

WARNING! RISK OF CONTACT WITH BATTERY ACID. BATTERY ACID IS A HIGHLY
CORROSIVE SULFURIC ACID.
Remove all cord wraps and uncoil the cables prior to using the jump starter.
•
Be sure the area around the battery is well ventilated while the jump starter is being used.
•
Clean the battery terminals before using the jump starter. During cleaning, keep airborne corrosion from coming into contact
•
with your eyes, nose and mouth. Use baking soda and water to neutralize the battery acid and help minimize airborne
corrosion. Do not touch your eyes, nose or mouth.
Determine the voltage of the battery by referring to the vehicle owner's manual and make sure that the output voltage of the
•
jump starter is correct.
Make sure that the jump starter cable clamps make tight connections.
•

JUMP STARTER LOCATION

WARNING! RISK OF EXPLOSION AND CONTACT WITH BATTERY ACID.
Locate the jump starter as far away from the battery as the DC cables permit.
•
Never place the jump starter directly above the battery being jumped; gases from the battery will corrode and damage the
•
jump starter.
Do not operate the jump starter in a closed-in area or restrict the ventilation in any way.
•
4
SPECIFICATIONS
Capacity
20Ah (C20)
Charger Operating
Output Temperature
-10°C (14°F)
12V 2 A
to 40°C (104°F)
Charging/battery status LEDs
Nominal 12V Aux DC
Voltage Power Output
12V DC 15A
Charging Storage
Temperature Temperature
0°C (32°F) -15°C (5°F)
to 40°C (104°F) to 40°C (104°F)
Cord/clamp holder
Fuse
Battery status button
Rated
Fuse
Cranking Amps
400 300A
Weight Dimensions
lbs / kg in / mm
16 x 4.72 x 12.6
23 / 11
405 x 120 x 320
MACTOOLS.CO.UK