Tips for Maintaining your Shower Panel Scale Removal
1. If scale deposits are noticed in the jet spray nozzles, turn the water on
using a low flow setting and lightly rub the rubber nozzles with your
finger or a non abrasive sponge or clean cloth (see (a))
2. If scales or deposits are stubborn or difficult to remove, especially is
present on the chrome plated surface of the shower head or jet
sprayers, please follow these steps:
a. pour approx. 1 cup of commercial scale remover such as
"LIME AWAY™" or CLRTM into a shallow dish.
b. dilute the scale remover with water as instructed in the scale
remover instructions.
c. remove the shower head or jet sprayer affected and soak it face
down in the scale remover solution for 2-5 minutes or as
recommended on scale remover instructions (see (b))
3.Thoroughly rinse the shower head or jet spray part with warm water
(see (c))
4. Reinstall the shower head or jet spray part. Turn on the shower and
allow the part to be flushed for about 1 minute.
- 15 -
(a)
3/4"
(b)
(d)