Cleaning Agitator; Replacing Agitator - Dustbane QS2 Instrucciones De Operación

Card
Carte
Tarjeta

Cleaning Agitator

➢ Clean agitator after every five uses
➢ Turn off and unplug the vacuum
➢ Remove lower plate (page 44).
➢ Cut off any hair, thread, string,
➢ Remove agitator (page 46).
➢ Remove any string or debris located
➢ Reinstall agitator (page 46) and

Replacing Agitator

➢ When the bristles on the agitator are
➢ Turn off and unplug the vacuum
➢ Remove lower plate (page 44) and
➢ Clean debris from end caps.
➢ Position belt over belt pulley on the
➢ Reinstall agitator (page 46) and
- 48 -
and every time the belt is replaced.
cleaner.
carpet pile, and lint entangled
around agitator with a pair of
scissors.
on the end caps, washers or agitator
shaft.
lower plate (page 44).
worn so that they do not touch a
card held across the lower plate, the
agitator should be replaced.
cleaner.
agitator (page 46).
new agitator (page 46).
lower plate (page 44).