Hamilton Beach HCR410 Manual De Uso página 11

Operating Instructions
PRESET RADIO STATION
If the batteries were installed correctly, you can store the
tuning frequency of 20 radio stations in the memory, 10 for
each of the AM and FM waveband ranges, by following these
steps:
1. Search for and stay on one desired AM/FM radio station.
2. Press and hold (at least 2 seconds) the TIME/MEMORY button.
"P 01" or "P--" (previous setting) will flash on the display.
3. Press the HOUR/TUNE– or MIN/TUNE+ button to select the
preset station from P01 to P10.
4. Press the TIME/MEMORY button again before the display of
your chosen preset station "P--" stops flashing. The tuning
frequency will be stored as the corresponding "P--."
5. Follow steps 1–4 above to store desired stations as P01–P10.
6. If you want to play a preset station, just press the TIME/
MEMORY button during radio mode to select the preset
station P01–P10 that you want to listen to.
NOTE: If the TIME/MEMORY button is not be pressed while the
display "P--" flashes 4 seconds (4 flashes) before stopping, the
station frequency has not been saved successfully into memory.
USB CHARGING FEATURE
You can use the USB port to charge your phone or device,
with the maximum output of 5VDC@0.5A.
Please use your device's specific charging cable. Connect the
cable to the USB port of the unit and then plug the cable into
your device.
11
(cont.)