MAGLOGIX XBAM-L-1000 1000lb Manual De Instrucciones página 5

Technical data
Prod.-No.:
Designation:
Breakaway force:
Max. load-bearing capacity:
(on flat material
with safety factor 3:1)
Max. load-bearing capacity:
(at 6° inclination acc. to EN 13155
with safety factor 3:1)
Max. load-bearing capacity:
(at 90° inclination of the load
with safety factor 3:1)
Dead weight of the magnet:
Storage temperature:
Operating temperature:
Markings on the lifting magnet
Additional detailed descriptions for handling and operating conditions can be found on both sides of the lifting
magnet. This labeling must not be modified, damaged or removed, as otherwise the manufacturer cannot be held
responsible for any personal injuries, property damage or accidents resulting from this fact. New labels must be
ordered from the manufacturer if necessary.
TML1000A.1
XBAM-L-1000 Lifting magnet
>3000 lbs on ½" AISI CRS 1020 Steel
1100 lbs on ½" AISI CRS 1020 Steel
950 lbs on ½" AISI CRS 1020 Steel
330 lbs on ½" AISI CRS 1020 Steel
16 lbs
-22°F to +140°F
+14°F to +140°F
>1500 kg on 15 mm S235
500 kg on 15 mm S235
440 kg on 15 mm S235
150 kg on 15 mm S235
7.3 kg
-30°C to +60°C
-10°C to +60°C
5