Safety Tips; Reduce The Risk Of Fire Inside The Oven; Reduce The Risk Of Injury; Introduction - Buffalo L320 Manual De Instrucciones

UK
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO MICROWAVE ENERGY
DO NOT ATTEMPT TO OPERATE THIS OVEN WITH THE DOOR OPEN, SINCE OPEN DOOR OPERATION CAN RESULT IN HARMFUL EXPOSURE TO MICROWAVE
ENERGY. IT IS IMPORTANT NOT TO DEFEAT OR TAMPER WITH THE SAFETY INTERLOCKS.
DO NOT PLACE ANY OBJECT BETWEEN THE OVEN FRONT FACE AND THE DOOR OR ALLOW SOIL OR CLEANER RESIDUE TO ACCUMULATE ON SEALING
SURFACES.
DO NOT OPERATE THE OVEN IF IT IS DAMAGED. IT IS PARTICULARLY IMPORTANT THAT THE OVEN DOOR CLOSES PROPERLY AND THAT THERE IS NO
DAMAGE TO THE:
DOOR (BENT)
1.
HINGES AND LATCHES (BROKEN OR LOOSENED)
2.
DOOR SEALS AND SEALING SURFACES
3.
THE DOOR SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

Safety Tips

• Read all instructions before using the appliance.
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out installation and
any repairs if required. Do not remove any components or service
panels on this product.
• Consult Local and National Standards to comply with the following:
• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
• This oven is only designed to cook heat or dry food. It is not suitable for
laboratory or industrial use.
• DO NOT operate the oven when empty.
• DO NOT use jet/pressure washers to clean the appliance.
• DO NOT use the appliance outside.
• DO NOT allow oil or fat to come into contact with the plastic
components or door seal. Clean immediately if contact occurs.
• DO NOT use this appliance to dry fabric.
• DO NOT fry food in the oven.
• DO NOT store anything on top of the appliance during operation.
• DO NOT heat food/liquid in sealed containers.
• DO NOT heat water and oil together.
• DO NOT operate the oven without the glass tray, roller support and
shaft in the correct position.
• Children must be supervised at all times if using the appliance.
• Always switch off and disconnect the power supply to the unit before
cleaning.
• Keep all packaging away from children. Dispose of the packaging in
accordance with the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a BUFFALO agent
or a recommended qualified technician in order to avoid a hazard.

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible
performance from your BUFFALO product.

Pack Contents

The following is included:
• BUFFALO Combination Microwave Oven
• Roller Ring
BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
1

Reduce the risk of fire inside the oven

•
•
•
•
•
•

Reduce the risk of injury

•
•
•
•
•
• Glass Tray
• Instruction Manual
Never leave the oven when using combustible materials such as plastic
or paper to aid cooking.
Never use recycled paper within the oven. This can contain small metal
fragments.
Remove wire twist ties from paper or plastic bags before placing in the
oven.
Always ensure utensils are suitable for use in a microwave oven.
If materials ignite within the oven:
• Keep door closed
• Turn oven OFF
Do not use the oven for storage purposes. Paper products, food and
cooking utensils must be removed when not in use.
Liquids such as water, coffee and tea can overheat beyond boiling point
without appearing to be boiling.
Always stir the contents of baby bottles/jars after heating, and check
the temperature before serving.
Do not use narrow necked containers to boil or reheat liquids.
Liquids may splash out during or after heating or when adding
ingredients, resulting in possible harm or injury.
After heating, allow any containers to stand for 40 seconds before
removing.
Note: This product is Group 2 Class B ISM equipment.
Group 2 equipment contains all ISM (Industrial, Scientific
and Medical) equipment in which radio-frequency energy is
intentionally generated and/or used in the form of
electromagnetic radiation for the treatment of material,
and spark erosion equipment.
Class B equipment is suitable for use in domestic
establishments and establishments directly connected to a
low voltage power supply network.