Leg Assembly - Homak GARAGE Serie Guía De Utilización Y Directivas De Funcionamiento

LEG ASSEMBLY:

* It is recommended that at least two people assist in the assembly and
installation of this unit.
Locker Cabinet & Base Cabinet
1) Lay cabinet on its back
2) Install Leg Levelers using 32 bolts and 32 washers (Part H).
MOUNTING YOUR WALL CABINET TO THE WALL:
1) Open the doors to your unit and locate the 4 mounting holes.
2) Align the mounting holes with two sixteen-inch wall studs.
3) Secure the back of the cabinet to the wall studs using the 4 screws
and washers provided (Pièce H).
MAINTENANCE
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint fi nish can be
cleaned with spray wax. Lightly spray the wax on the surface, and gently
wipe with a soft, dry microfi ber cloth. Window cleaner and a soft cloth
dampened with water can be used to clean the fi nish on a regular basis.
Customer Satisfaction
All mechanical parts are inspected and adjusted for proper use before
shipment; however, mechanisms such as locks may shift during transit.
Should any of these items not operate correctly, please call customer
assistance at 1-800-874-6625.
- 3 -