RISCO Group RVCM52E Guia De Instalacion página 9

4. Click the Network Cameras link in the left-hand column; the IP Camera List
page is displayed.
Figure 7 IP Cameras List
5. Click Add Camera; the Add Camera dialog box is displayed.
Figure 8 Add Camera
6. Define the following fields in the Add Camera dialog box.
Field
Label
Partitions
Type
MAC Address
Figure 6 Control Panel Update Page
Description
Enter a name for the camera
Select the partition(s) from the list of defined partitions
Choose the RISCO camera type (for ONVIF or Generic camera type
settings, refer to the RISCO Cloud Installer Application Manual)
Enter the MAC address into this field. The MAC address (media access
control address) is the unique identifier assigned to the IP camera for
communications on the physical network.
NOTE: The MAC address is case sensitive and should be entered
exactly as it is shown on the box or on the back cover of the IP camera,
e.g. AA:BB:CC:DD:EE:FF
9