CARE AND MAINTENANCE
•
Periodically wipe the entire lantern with a soft clean cloth.
USAGE
Light
The Dome USB Lantern has 3 light modes.
1. To turn unit on: press the power button 2 times for High mode (pressing
once will only show the battery status)
2. To change modes: press the power button to cycle through the modes once
for each mode (High > Low > SOS > OFF).
Power Bank
The DomeUSB Lantern doubles as a portable power bank which allows you to
charge your devices when you need them.
1. Open the dust cover from the USB port
2. Connect a user-supplied USB cable to the USB power port
3. The battery indicator LEDs will illuminate.
4. After use, disconnect the USB cable and replace the dust cover.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2016 Wagan Corporation. All Rights Reserved.
4