Publicidad
Idiomas disponibles
Idiomas disponibles
1 - 2. MIC Input. XLR 3 pin/Jack 1/4" connectors for a
microphone input.
3. LINE Input. 2x RCA connectors that allow to connect
an external unbalanced audio device (CD, tuner, deck)
4. LINE Input. XLR 3 pin connector for a LINE input
5. LINE Out. Jack 1/4" connector in order to send the
pre-amplified signal to another amplifier device.
6. LINE Out. XLR 3 pin connector in order to send the
pre-amplified signal to another amplifier device.
7. SD Card Slot.
8. LCD Display & button interface
9. USB port
10. MIC Volume control. It is used to adjust the signal
level from the Microphone input.
11. LINE Volume control. It is used to adjust the signal
level from the LINE input.
12. MAIN Volume. It controls the level of the overall
system output.
13. TREBLE control. It provides a boost or cut of up to
15 dB for the high frequency.
14. BASS control. It provides a boost or cut of up to
15 dB for the high frequency.
15. POWER/LIMIT LEDs
POWER LED (green colour) lits when the unit is connected. LIMIT LED (red colour) lits
when the output signal has distortion. Reduce the volume in order to turn off this LED.
16. VOLTAGE SELECTOR. It allows to select the main input voltage according the installation place.
17. On/Off Power switch. Press it to power on/off the
device
18. AC power. Connect the incorporated AC power cord.
MBS Series (Active/Passive)
- 4 -
EN
User Manual / Manual de uso
Publicidad
