Battery Empty - wilux AQUATRONIC Manual De Instrucciones

display will visualize:
PUMP ON/OFF
If "ON" is blinking it means that the function pump is memorized as active in the program.
If you want to cancel this function, choose OFF by means of the key @@ and press OK. In
this way in the memory of the program the function will be deactivated.
Function temperature
Pressing repeatedly the key @@ you can move inside the menu until the word
TEMPERATURE will occupy the first position on the display and can be chosen pressing
the key OK. On the display of the infra –red receiver the temperature of the water in the
bathtub will be visualized for 5 seconds.
Function language
This function should have been settled already from the beginning, as soon as you switch
on the remote control. In any case, pressing repeatedly the key @@ you can move inside
the menu until the word LANGUAGE will occupy the first position on the display and can
be chosen pressing OK. On the display you will now read:
ENGLISCH
ITALIANO
Pressing key @@ you can visualize the list of the various languages (englisch, italiano,
français, deutsch, español, nederlands, türke, (greco). When the language you want to
choose will be on the first line of the display press OK and the menu will be translated
immediately in the chosen language.
Press key @@ to return to the main menu.
IMPORTANT
On the display near the word language is visualized also an *. If you mistake in choosing the
language with the help of this sign you will succeed finding the function "language" again.
Function battery
Pressing key @@ repeatedly you can move inside the menu until the word BATTERY will
occupy the first position on the display and can be chosen pressing OK. On the display
you will now read:
BATTERY OK
Or

BATTERY EMPTY

Than you will have to change the battery.
27