Garden Wood Furniture 85998KFRS1 Manual Del Usuario página 4

2) Center the leg assembly on the bottom of the Top (1) and fasten in place with Phillips
Screws (E) through the predrilled holes in the Top Support, as shown in Figure 2.
3) Attach a Brace (5) to inside edge of each leg and the Top Support with Phillips
Screws (E) through the predrilled holes in the Braces.
4) If not using an umbrella with the table, insert one Wood Plug (H) into the hole in the
middle of the Table Top and one in the Base.
85998KFRS1 – Page 4