Chauvet Professional EPIX Drive 900 Guía De Referencia Rápida página 5

ÉPIX Drive 900 QRG
Connecting
ÉPIX Products
Length of cables between products must
not exceed 60 ft (18 m) when shielded,
or 100 ft (30 m) when unshielded
The ÉPIX Drive 900 is the power supply for the ÉPIX Tour series of products.
Each product must be daisy chained together in series. This power supply is
capable of powering up to 900 LEDs in the various configurations.
Length of cables between ÉPIX Drive 900 and
st
1 product must not exceed 65 ft (20 m) when
shielded, or 150 ft (45 m) when unshielded
Total length of cables cannot exceed 210 ft (64 m)
when shielded, or 300 ft (91 m) when unshielded
·
The ÉPIX Drive 900 can support various ÉPIX products daisy chained
in the various configurations up to a total of 900 LEDs.
Example configurations include:
·
18 ÉPIX Strip Tour products.
·
6 ÉPIX Bar Tour products.
·
4 ÉPIX Bar Tour products and 6 ÉPIX Strip Tour products.
·
15 ÉPIX Strip Tour products and 1 ÉPIX Bar Tour product.
·
Make sure the total length of the connecting shielded 4-pin XLR cables
does not exceed 210 ft (64 m). Using unshielded cables will increase the
maximum cable lengths to 300 ft (91 m) shown in the diagram above.
Download the User Manual from
more details.
Standard 4-pin XLR "Scroller Cables" are typically shielded.
1 = Power + (16 AWG or larger)
2 = Data + (18–24 AWG)
3 = Data - (18–24 AWG)
4 = Power - (16 AWG or larger)
www.chauvetprofessional.com
5
EN
for