16.3 Moving the appliance
17 Troubleshooting
17.1 Safety notices
17.2 Fault indications and rectification of faults
Turn off the appliance first and then unplug the unit from the
wall outlet.
Remove all content.
Shurely tape down all lose items inside your appliance.
Tape doors shut. Be sure the wine refrigerator stays in the
upright position during transportation.
This chapter provides you with important notices with regard to
operating the device. Observe the following notices to avoid
dangers and damages:
► Only qualified electricians, who have been trained by the
manufacturer, may carry out any repairs on electrical
equipment.
► Improperly performed repairs can cause considerable
dangers for the user and damages to the device.
The following table assists in localizing and rectifying minor faults.
Fault
Wine refrigerator do not
operate.
Wine refrigerator is not cold
enough.
Attention
Not plugged in using different voltage.
The circuit breaker tripped or a blown
fuse.
Check the temperature control setting.
External environment may require a
higher setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The wine refrigerator does not have
the correct clearance.
Possible Cause
45