Cleaning And Care; Cleaning The Remote Control; Changing The Battery - Miele DARC 6 Instrucciones De Manejo

Mando a distancia para campanas extractoras
Ocultar thumbs Ver también para DARC 6:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
en - Cleaning and care

Cleaning the remote control

 Only clean the surface with a damp
cloth. Do not use too much water to
avoid moisture penetrating the ca‐
sing.

Changing the battery

Use only the type of battery listed.
Do not use rechargeable batteries.
The remote control requires one 3 V CR
2032 battery.
The battery must be changed if cooker
hood functions can no longer be selec‐
ted using the remote control or if the
LED light on the remote control does
not light up, or only lights up dimly
when a control is pressed.
Cooker hood functions can still be se‐
lected using the cooker hood controls.
14
 Use a screwdriver to loosen the two
screws on the back and remove the
cover.
 Remove the old battery and replace
with a new one, making sure the po‐
larity is correct.
 Replace the cover.
 Dispose of the old battery responsib‐
ly.

Publicidad

Tabla de contenido
loading

Tabla de contenido