Assembly, Steps 4,5,6 - HAMPTON BAY 80434/25MM4495-PB84 Guía De Uso Y Cuidado

Assembly (continued)
4
Center Side Panel installation
Attach the Center left side Panel (B) and Center
Right side Panel (C) to complete assembly from step 3
with Connection Plate.
Tighten the Screw (FF), using Bolts (DD) through the
holes in the Plastic Connector.
Hardware Used
Part Description
DD Bolt
FF Screw
DD
K
C
6
Side Panel installation
Attach the Completed assembly from step 5 to the
Hearth/Base (A).
Insert Bolts (AA) through the pre-drilled holes in the Plastic
Connector, from the bottom.
Hand tighten the screws.
Insert one Wood Dowel (CC) into each of pre-drilled
holes.
Push the Right Side Panel (F) and Left Side Panel (E) snug to
Hearth/Base (A).
Insert Bolts (AA) through the pre-drilled holes in the Plastic
Connector.
Hand tighten the screws.
5
Qty
4
2
B
FF
8
Feet installation
Insert Wood Dowels (CC) through the holes on the
Hearth/Base (A).
Push Left Foot (O) and Right Foot (P) snug to the Base
Panel.
Insert Bolts (AA) and Washers (BB) through the
pre-drilled holes in the Base Panel(A) and tighten.
Attach Support Panel (Q) to Base Panel (A), insert Bolts
(DD) through the pre-drilled holes in the Hearth/Base (A)
and tighten.
Hardware Used
Part Description
AA Bolt
BB Washer
CC Wood Dowel
DD Bolt
Q
A
BB
AA
O
CC
Hardware Used
Part Description
CC Wood Dowel
DD Bolt
II Screw
E
CC
II
Qty
10
10
6
2
BB
AA
P
DD
Qty
4
6
2
F
DD
CC