Tabla de contenido
Publicidad
ATTENTION
PLEASE ENSURE THE APPLICATIONS WITH THE START POWER LESS THAN 500WATT. OR
ELSE, THE CABINET WILL SHUT DOWN THE OUTPUT TO PROTECT THE SOLAR SYSTEM.
IF THE APPLICATION CAN NOT WORK, PLEASE ENSURE THE CONNECTION IS CORRECT
AND YOU HAVE FOLLOWED THE ABOVE OPERATION STEP.
12VDC OUTPUT
1. INSERT THE 12VDC APPLICATION PLUG INTO THE 12VDC OUTPUT SOCKET（CIGARETTE
LIGHTER SOCKET） OF CABINET.
2. TURN ON THE APPLICATION SWITCH.
PLEASE ENSURE THE 12VDC APPLICATION POWER IS LESS THAN 240WATT.
USB OUTPUT
INSERT THE CONNECTION CALBE PLUG OF CELL PHONE/MP3 INTO THE USB SOCKET OF
CABINET. THEN THE CELL PHONE/MP3 CAN BE CHARGED.
DESCRIPTION OF SYSTEM PROTECTION
IN THE EVENT OF OVERLOAD/SHORT CIRCUIT/HIGH TEMPERATURE/LOW POWER, THE
SYSTEM WILL SHUT DOWN AUTOMATICALLY TO PROTECT THE SOLAR SYSTEM.
PLEASE CHECK THE BELOW INTRODUCTION FOR SYSTEM PROTECTION.
DESCRIPTION
HIGH OR LOW INPUT
VOLTAGE
BATTERY
LOW
VOLTAGE
OVERLOAD
OVER
TEMPERATURE
SHORT CIRCUIT
ALARM
3 SHORT BEEP
1 SHORT BEEP
2 SHORT BEEP OR 3
SHORT BEEP
4 SHORT BEEP
5 SHORT BEEP
INVERTER
INDICATOR
RED COLOR
GREEN COLOR
RED COLOR OR RED
COLOR
WITH
FLASH
RED COLOR
RED COLOR
SOLUTION
TURN OFF MAJOR SWITCH AND INVERTER
SWITECH, THEN CONNECT 12V BATTERY.
CHARGING
THE
BATTERY
POWER OR AC POWER IN TIME.
CONNECT
THE
CORRECT
APPLICATIONS
AND
INVERTER.
SHUT DOWN THE SYSTEM FOR 5 MINUTES
AT LEAST, THEN RESTART THE SYSTEM.
DISCONNECT
THE
APPLICATION, THEN RESTART INVERTER.
BY
SOLAR
POWER
RESTART
THE
SHORT
CIRCUIT
Publicidad
Tabla de contenido
