Axess PABT 6030 Manual De Instrucciones página 2

PANEL FUNCTION LAYOUT
8
10
11
12
13
14
15
16
17
18
19
20
1. DC Charging port: insert the charging adapter into the DC9V input port on the rear
of the unit. When the battery is charging this indicator will illuminate. When the
battery is fully charged the indicator will turn off.
2. Main volume knob: use this knob to adjust the volume of USB/TF/BTL/FM music.
3. Treble Knob: use this knob to adjust the treble levels.
4. Bass Knob: Use this knob to adjust teh bass levels.
5. Microphone Volume Knob: use this knob to adjust the microphone volume levels
6. Microphone Echo Knob: use this knob to adjust the microphone echo levels
7. LED lights Power button: press this button to turn on and off the front LEDs
8. USB/TF Display screen: the elapsed time and format will appear on this display
screen for the usb USB/TF card inputs
9. FM Antenna: For best results fully extend the antenna
10. USB Flash Drive input: insert your USB flash drive into this slot. The unit will only
read mp3, .wav, .wma files from the USB flash drive. The maximum storage size of the
USB flash drive cannot exceed 32GB. Do not attempt to connect a computer to the
USB input as the speaker will not be able to connect to a computer.
11. TF Input: Insert your TF card into this slot. The unit will only read .mp3, .wav, .wma
files from the TF card flash drive cannot exceed 32GB
12. Next Track/Next FM station (CH+): When using the speaker in USB/TF card &
1
Bluetooth mode, press this button to go to the next track. When using the speaker in
FM mode, press this button to go to the next stored FM station.
13. Play/Pause & FM scan: press this button to pause the signal from the USB flash
2
drive TF card or Bluetooth inputs. When using the speaker in FM mode, press this
button to auto scan for all available stations. Each will be stored. Press the CH+ and
3
CH- to choose a station
4
14. Previous Track/Previous FM station (CH-): when using the speaker in USB/TF card
& bluetooth mode, press this button to go to the previous track. When using the
5
speaker in FM mode, press this button to go to the previous stored FM station.
6 15. Repeat track: Tap this button to single track repeat.
16. Mode selector/recording: press this button to switch between USB, TF and
bluetooth inputs. press and hold for 3-5 seconds to begin recording onto the USB
flash drive or TF card.
Steps to Connecting via Bluetooth: start by pressing the mode selector button until
the word BLUETOOTH displays on the control panel LED screen or mentioned. Make
sure that the your mobile device has its Bluetooth mode turned ON as well. Search
for the device name "PABT6023" on you mobile device screen and activate the
7
connection between between both devices. Your audio should automatically begin to
play.
17. Microphone priority: when the microphone priority is activated, speaking into the
microphone will automatically lower the other audio signal 20dB.
18. AUX Input: connect your smartphone, mp3 player, laptop or other audio device to
this input.
19. Insert Microphone to front panel Mic Jack, adjust Mic Volume and Echo to best
level.
20. Power Switch: Press this switch turn ON and OFF the speaker. Before powering on
the speaker make sure the volume levels are turned down to prevent damage to the
amplifier or speakers.
Prompt
When people sleep, they need a quiet environment.
Please turn off music or turn off the power while sleeping.
This symbol indicates to user that the machine
with risk of electric shock
This symbol indicates to user that the machine
with important operation and maintenance
instruction