Music Playback - SOUND2GO COSMO Manual De Instrucciones

COSMO
Cable operation with 3.5 mm stereo cable
Keep the Play/Pause button pressed to disconnect a
player connected via Bluetooth. You can then connect
an audio source which is not Bluetooth-enabled via the
supplied cable with the 3.5 mm input jack (AUX IN) of
the speaker.
In this mode, the connected device cannot be controlled
via the buttons on the speaker.

Music playback

After successful connection, you can play your music in the
best possible quality via the speaker. In the case of a Bluetooth
connection, you can even control the music playback directly
on the speaker, without touching your player. Refer to the table
listed above for the key functions.
In the case of cable connection, you can only control the volu-
me from the speaker; all other operations must be performed on
the connected player.
36