Boost -COSMO2800 Manual De Uso página 4

WARNING
Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type.
Do not swallow the battery. Danger of chemical burns.
The supplied remote control contains a button cell. In case of ingestion, it might cause serious internal
burns within only 2 hours that might lead to death.
Keep new and old batteries out of the reach of children.
If the battery compartment doesn't close properly, stop using the product and keep it out of the reach of children.
If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body,
contact immediately a doctor.
INSTRUCTION OF USE
Press the POWER button to switch the unit on.
Press MODE button to select AUX/BT/USB/TF.
Press MODE button and it will enter AUX mode. Use the audio cable (included) to connect the "AUX input" of the
speaker to reproduce music from other devices.
Press MODE button to enter BT mode. Previously pair the chosen device to the speaker. Once they have been
paired successfully you can sit back and enjoy the music. Regulate the volume with the help of the volume knob.
BT Pairing Mode:
1. Press MODE button on the unit or the remote control until BT is selected.
2. Put the cell phone within 3 meters;
3. Activate the BT features on your cell phone so that the cell phone starts to search for the BT device. Please
refer to the users' manual for details
Select "BOOST-COSMO2800" from the device list found by the cell phone;
4.
For some cell phones, the users have to key in the identification code "0000" and press ENTER key to pair the
5.
unit and cell phone.
6. Press RETURN key on the cell phone to exit from the cell phone menu and play music with the unit when there
is no barrier between two cell phones within 10 meters. At this time, you can play music with the unit.
Shortly press PLAY/PAUSE button to play or pause music. Short press " " or "" key to select the previous
7.
or next track.
LINE IN MODE:
Press MODE button on the unit or the remote control until LINE is selected. Play the music of the device connec-
ted to the LINE input.
USB Mode:
After startup, press MODE to select "USB" and insert the USB device. The unit will automatically read and play
1.
the music in the USB device.
2. Press "‣ " key shortly to pause or play the track.
3. Shortly press " " key to skip to the previous track.
4. Shortly press "" key to skip to the next track.
TF Mode:
After startup, press MODE to select "TF" and insert the TF card. The unit will automatically read and play the
1.
music in the TF card.
2. Press " ‣" key shortly to pause or play the music.
3. Shortly press " " key to skip to the previous track.
4. Shortly press "" key to skip to the next track.
Built-in recording function of microphone sound
In USB/TF play mode: Long press on the record key to go into recording mode. The current sound output will stop
and go to mute status. The recording will start when the screen displays 00:01. You can use a microphone to re-
cord. If you connect the USB/TF card for the first time to the speaker, the system will create a folder.
4
BOOST-COSMO2800 / Code: 10-7137BO
EN