Danze Cirtangular-Knightsbridge DF022230 Instrucciones Para La Instalación página 5

9. Set the vanity (A) back to the intended posi-
tion, aligning holes with anchor positions.
10. Install the wall anchor hardware with a Phil-
lips screwdriver in the following order: flat
washer (S), plastic washer (D), spring washer (E),
wood screw (F) and metal cap (G).
11. Install the Cirtangular™ lavatory according
to the installation instructions provided with
the lavatory. The top of your Cirtangular-
Knightsbridge™ vanity (A) features a channel
custom fit for your lavatory to provide a solid
seal and clean, straight lines.
7
12. Install the knobs (H) on the door with 1"
bolt (I) and on the drawer with 1 ¼" bolts (Q)
using a Phillips screwdriver.
13. If needed, door hinges can be adjusted for
height and depth by loosening the hinge screws
on the inside and positioning them to the ap-
propriate location.
14. If needed, drawer glides can be adjusted for
height.
Please refer to Homeowner Care Manual for troubleshooting, care and mainte-
nance information.
8