Troubleshooting - Royal Sovereign RBE-2000 El Manual Del Propietario

RBE-2000

TROUBlESHOOTING

Symptom Solution
Punched holes are not centered. Adjust the edge guide and use scrap paper to test if the holes are centered.
Check that the paper waste tray is empty and correctly fitted. Check for
Machine will not punch.
blockage in the paper entry
Take a stiff object and slide it sideways through the paper entry to release any
Punched holes are not parallel to the edge.
paper clippings into the paper waste tray.
Ensure that the punching capacity is not exceeded. Adjust edge guide and use
Holes are partially punched.
scrap paper to test if holes are properly punched.
Hole edges are damaged. Reduce the number of sheets being punched.
Waste tray is leaking. Check that the paper waste tray is empty and correctly fitted.
if you are still having complications, please contact Royal Sovereign's Service Center at 1-800-397-1025.
9