Cleaning Instructions; Before Assembly; Tools & Equipment - Palram Sierra 2.3x2.3 Manual Del Usuario

go
Please read these instructions carefully before you start to
assemble this product.
Please carry
out the
steps
in
the order
set
out
in
these instructions.
Keep these
instructions
in
a
safe place
for future
reference.
P
When encountering the information icon, please refer to the relevant
assembly step for additional comments and assistance.
...:are
and Safety Advice
Please
follow
the instructions
as
listed
in
this manual.
Having purchased
a
long patio cover, make sure you received all boxes according
to the additional page (Extending your patio
cover) on
the instruction manual.
As
soon
as
you are ready
to
assemble
your patio
cover (you can
start with this
box),
sort the parts and check
in
accordance with the content
list
For
safety purposes we strongly recommend the product to
be
assembled
by at least
two people.
Some parts may have sharp edges. Please be careful when handling components.
Always wear gloves,
eye
protection, and long sleeves when assembling or
performing any maintenance on your product.
Do
not attempt to
assemble the product
in
windy or wet conditions.
Dispose
of
all
plastic bags safely
-
keep
them out of
reach
of
small children.
Keep
children away from the assembly
area.
Do
not attempt to
assemble the
product if
you are tired, have taken drugs,
medications
or alcohol, or if you are prone to dizzy spells.
When using
a
stepladder or power tools, make sure you
follow
the
manufacturer's safety advice.
Do
not climb
or stand on the roof.
Heavy articles should
not
be leaned against the poles.
Do
not
hang or lay on
the profiles.
Keep
roof and gutter
clear
of
snow,
dirt
& leaves.
Heavy snow load on
roof
can damage the
product making it
unsafe
to
stand
below
or nearby.
This
product
was
designed to
be used
mainly
as
a
Patio cover.
Some versions of this product
are
painted.
If color was scratched during assembly it
can be
fixed with the following tints:
White
-
RAL
9016 Grey
-
RAL
7012
Cleaning Instructions
When
your product
needs cleaning, use
a
mild detergent solution and
rinse
with cold clean water.
Do not
use
acetone, abrasive cleaners, or others special detergents to clean
the panels.
Before Assembly
This
product must
be assembled on
a
solid base (such
as
concrete or asphalt)
and anchored to the ground.
Choose
your
site
carefully before beginning
assembly.
Sort
the parts and check according to the contents parts
list.
Site surface needs to
be
leveled (mainly below the
poles).
Please
consult your
local
authorities if
any
permits
are
required prior to
constructing the product.
Prior
to enlarging the
Patio Cover, several
parts need to
be
dismantled,
it
is
recommended to keep them
in
a
safe place
for future
use.
Note:
Use
only the parts registered
in
the content list, some parts may
be
surplus.
Tools &
Equipment
T001
(Supplied)