Installation - Wall-Mount (continued)
4
Hanging the electric firebox
□ Hang the electric firebox (A) on the mounting bracket (C).
5
Inserting the ember bed
□ Arrange the ember beds (acrylic crystals [D] pebbles [E] or
log set [F] ) along the inset window ledge at the front of the
electric firebox (A).
6
Installing the glass front
NOTE: This glass front is heavy. It is recommended that you use two
people at this stage to prevent damage to the glass front or the electric
firebox.
□ Lift the glass front (B) into place, making sure the 2 tabs on the top
back of the glass front (B) fit securely into the holes on the top of the
electric firebox (A).
□ Secure the glass front (B) by fastening two small screws (AA) on both
sides.
8
A
D, E, or F
B
A
AA