Frequently Asked Questions - Marmitek BOOMBOOM 80 Modo De Empleo

FREQUENTLY ASKED QUESTIONS

I can't connect my BoomBoom 80.
Check the following:
1. Ensure that the power adapter is connected and the blue LED
flashes slowly.
2. Ensure that the Bluetooth function on your mobile telephone is on
(check your phone's manual for reference).
3. Ensure that the distance between your mobile phone and the
BoomBoom 80 is no greater than 10 metres and that there are no
large obstacles in the way.
4. Please make sure that the BoomBoom 80 is not already
connected to another device. (The blue LED lights up
continuously.)
No sound comes out of the audio installation
Ensure that the audio cable is correctly connected (AUX IN), that the
correct input has been selected on your audio installation and that your
audio system's volume is set to the desired level.
Can I link numerous devices to my BoomBoom 80?
You can link up to 8 devices to your BoomBoom 80. You can link up to
8 devices. However, only 1 device can be connected to the
BoomBoom 80 at one time.
The sound is distorted by a hum or interference
If you do not use an adapter to power the Boom Boom 80, but, for example,
connect it to your audio system's USB connector, the resulting ground loop
may sometimes cause a hum. In this case, use a USB power adapter.
Using a USB port from, for example, a PC may also cause interference.
Do you have any other questions that have not been resolved by the
above information? Please go to www.marmitek.com
8
© MARMITEK