Briggs & Stratton BS2AC48 Manual Del Propietário página 9

OPERATION
C A U T I O N
Charge in a well ventilated area. Do not block charger vents. Keep them clear
to allow proper ventilation.
CHARGING PROCEDURE
NOTE: The battery is not shipped fully charged. It is recommended to fully
charge before first use to ensure that maximum run time can be achieved.
This lithium-ion battery will not develop a memory and may be charged at any
time.
Low voltage charging:
If the battery has been stored with little to no charge for a long period of time,
the charger will go into recovery mode, which will take 20 hrs to fully charge
the battery. This will enhance the life of the battery. Once it is fully charged,
the next charge will return to standard charging.
1. Plug the charger into an AC power outlet.
2. Insert the battery pack into the charger.
This is a diagnostic charger. The Charger LED Lights will illuminate in specific
order to communicate the current battery status. They are as follows:
Fully
Charged
LED STATUS
Solid Green
Blinking Green
Solid Red
Blinking Red
9
Charging Over
Temperature
DESCRIPTION
Fully Charged
Charging
Over Temperature
Charging Fault
Charging
Fault