Assembly - EASYHOME 8361 Manual De Usuario

USA

Assembly

Step 1
Please follow these step by step instructions carefully.
Your shelving unit has a load capacity of up to 350lbs per shelf when weight is evenly distributed.
E
1. The shelves (A) are held on with pairs of the shelf support clips (E). Align two halves of the shelf support clops on
the support pole at the desired height of the bottom shelf. When clips are together they form a slight cone shape.
The top of the clips is the thin end.
2. The shelf support clop (E) is in the proper place when the raised ridge on the inside of the clop locks into the
ridge on the support pole.
3. Repeat for all 4 support poles so all clips are at the same height.
THE BOTTOM SHELF MUST GO ON FIRST, THEN WORK YOUR WAY UP.
4. Screw lever feet (F) into the bottom of each pole (these are used to adjust the shelf when on uneven surfaces).
AFTER SALES SUPPORT
1-561-372-4151
USA
B
E
F
Heavy Duty Black Shelving
Raise ridge on inside of clip
MODEL: 8361 PRODUCT CODE: 8361 12/2014
5
www.aldi.us