Remote Control - Trevi IP 360 S8 Manual Del Usuario

IP 360 S8
CONNECTIONS AND REMOTE CONTROL
8
1
4
7
3
6
5
2
1. 2. USB Sockets: To connect external USB devices such as memory sticks, Hard External
disk, wireless mouse, wireless keyboards, etc....
3. Slot for Micro SD Card.
4. Reset.
5. HDMI: Video output for connection to HDTV.
6. AV Output: Composite video signal output (CVBS). cable not included.
7. LAN RJ45 Ethernet: 10 / 100Mbps Ethernet interface for connection to the local network.
8. Power socket DC IN 5V: Connect the supplied power adapter.

REMOTE CONTROL

Installing the Batteries
Remove the battery cover from the Remote Control and put 2xAAA size batteries inside
the compartment. The diagram inside the Battery Compartment shows the correct way
to install the batteries.
9. BUTTON: Power ON/OFF key.
10. TV IN BUTTON: To select the TV inputs.
11. SET BUTTON: To enter the TV settings.
12. SETUP BUTTON: To go directly to the menu of the IP 360 S8 settings.
13. APP BUTTON: To enter directly into the application page.
14. BUTTON: To return to Main (Home) page.
16