ACDelco ARM303-4A-340 Manual De Instrucciones página 10

Name of Function Key
C key
U/S key
M key
F/K/A key
(UP) key
(DOWN) key
POWER ON
Press C key to turn the digital torque tool on.
After the backlit LCD flashing, the display will be show 0000, and then enter the
operating mode. When this product is used for the first time, it will display the
product's smallest operating value after entering the operating mode. The units are
preset as N-m, the memory will display the first set, the mode will be tracking mode F,
the percentage position will display 0%, and the battery scale will show the voltage
detected at that time (all 30 memory data sets will have the same preset value).
POWER OFF
Press C key and hold 3 seconds to switch off.
RESET
Press C key to reset (when device turned on)
HOW TO SELECT UNIT
Press U/S key to select N-m, Kg-cm, lb-in, and lb-ft; the preset unit is N-m.
1 lb-in
1 lb-ft
1 N-m
1 Kg-cm
MEMORY FUNCTION
All memory data sets are preset as the smallest value. To set a memory value, press the
1English1
Torque Unit Conversion Table
lb-in lb-ft
1 0.083
12
8.851 0.737
0.868 0.072
English
Function Description
Power and Reset
Unit Selection
Memory Selection
Mode Selection
Number Increasing
Number Decreasing
N-m
0.113
1 1.356
1
0.098
-9
Kg-cm
1.152
13.83
10.2
1