Publicidad
Idiomas disponibles
Idiomas disponibles
LED's work
05 Security related information
When using the product, make sure the unit is sufficiently ventilated, never cover the unit
during operation and keep it out of reach of children or animals. This product is not a toy,
make sure the product is standing on a stable surface and always spread out the legs as far
possible. Fasten all screws handtight. LED lights are extremely bright and looking directly at
the light source during operation can lead to serious eye damage. Any other use of the device
than described in the manual may damage the product or cause danger to the user, e.g. due
to a short circuit, fire or electric shock. The safety instructions must be observed at all times!
06 Conformity of the product with legislation
The warranty expires in the event of damage due to non-compliance with the safety in-
structions of the device. Furthermore, we are not liable for consequential damage, damage
to objects or persons resulting from failure to observe the safety instructions and improper
use/handling of the device due to wear and tear. Product design and specifications are sub-
ject to change without notice. All logos and trade names are registered trademarks of their
respective owners and are hereby acknowledged as such.
07 Storage of the Manual
Please read the operating instructions carefully and completely before use. The operating
instructions are part of the product, they contain important information on the
commissioning and handling of the device. Keep all enclosed operating instructions for
future reference. If the device is sold or passed on to third parties, you are obliged to pass on
the operating instructions as these are lawfully part of the product.
08 Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of the product.
If damaged, it must not be put into operation.
1. Charge the work light completely before the first use. NOTE use a maximum of 2.5A
charger.
2. When the work light is fully charged (~ 4 hours) all indicator LEDs wil light up.
3. To dim the lamp, hold down the on/off button for a long time.
4. After use, store the work light indoors. Avoid storage in extremely high or low
tempetures, as this will negatively affect the lifespan of the battery.
Attention: when the working light is stored longterm (>6 months), charge it regularly.
This will prevent deep discharge of the battery. As this is normal for Lithium-Ion
batteries, a deep discharge does not form grounds for a refund or reclamation.
To pair a Bluetooth® speaker: 1. Briefly press the Bluetooth® button to switch on the speaker.
2. The Bluetooth® indicator light (Next to the bluetooth button) now flashes quickly. 3. Now
connect your music player to the speaker. 4. Briefly press the Bluetooth® button to switch off
the speaker. 5. If you want to reconnect to the same music player, just switch on the speaker
by briefly pressing the Bluetooth® button.
09 Operating the product
The safety instructions and warnings must be observed to ensure both the perfect condition
of the product and safe operation.
5
Publicidad
