Q Acoustics Q B12 Manual Del Usuario página 13

Stereo System
Connect a good quality stereo RCA phono lead to the L and R inputs on the Q B12 and connect
the other end to the PRE OUT sockets on the rear of the amplifier. The subwoofer will automatically
add the L and R signals together so that no information is missed.
If you wish to use two subwoofers then you can run a single RCA phono cable to each subwoofer
and thus have a stereo subwoofer system. Ensure that the L output on the amplifier goes to the
left hand side subwoofer and R to the right hand side to preserve the stereo image of the main
speakers. The subwoofers will need to be placed close to their respective main speakers and the
set-up will need to be done separately for each subwoofer.
STEREO AMPLIFIER
RIGHT LEFT PRE OUT
+
L
FRONT LS
-
R
13
SUBWOOFER
LINE IN
LEFT /
MONO
RIGHT