Pre-Use Inspection; Assembly - MSA XTIRPA 30-48 Instrucciones Y Manual De Seguridad

Use
Keep work area free from obstructions, trip hazards, and spills which
could impair the safe operation of the fall-rescue
Do not open the confined space access cover before complete
installation of the anchorage connector and all other system
components.
3.2.

Pre-Use Inspection

Inspect the confined space system to verify that it is in serviceable
condition. Examine every inch of the confined space system for severe
wear, missing or broken elements, corrosion, or other damage. Do not
use the confined space system if inspection reveals an unsafe condition.
3.3.

Assembly

Always work in teams of at least two (2) people (one (1) attendant and
one (1) confined space worker) who are qualified and trained on the
confined space system.
(1.) Remove all components and parts from bags, boxes, or shipping
(2.) Insert the mast into the Adapter Base sleeve (A).
US
US
14
container and set all on ground. Make sure that components are in
good working condition.
Fig. 8 Step 2A
MSA/XTIRPA™ Adapter Base System 30-48" Reach
Caution
system.