Aux; Audio Settings - Kenwood KDC-X399 Manual De Instrucciones

AUX

Preparation:
Select [ON] for [BUILT-IN AUX]. ( 5)
Start listening
1
Connect a portable audio player (commercially
available).
Auxiliary input jack
3.5 mm (1/8") stereo mini plug with "L"
shaped connector (commercially available)
2
Press repeatedly to select AUX.
3 Turn on the portable audio player and start playback.
Set the AUX name
While listening to a portable audio player connected to the
unit...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM], then press
the knob.
3
Turn the volume knob to select [AUX NAME SET], then
press the knob.
4
Turn the volume knob to make a selection, then press
the knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
5
Press and hold to exit.
To return to the previous setting item, press

AUDIO SETTINGS

While listening to any source...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
3
Turn the volume knob to make a selection (see the following table), then press
the knob.
4 Repeat step
5 Press and hold
(or using RC-406)
Portable audio player
1 Press AUD to enter [AUDIO CONTROL].
Press J / K to make a selection, then press
2
To return to the previous setting item, press
SUB-W LEVEL
For
BAND1 LEVEL –8 to +8 (+6)
BAND2 LEVEL –8 to +8 (+6)
BAND3 LEVEL –8 to +8 (+7)
BAND4 LEVEL –8 to +8 (+3)
BAND5 LEVEL –8 to +8 (0)
For
BASS LEVEL
MID LEVEL
TRE LEVEL
.
3 until the desired item is selected or activated.
to exit.
–15 to +15 (0) Adjusts the subwoofer output level.
:
The sound elements (frequency level, tone level, Q factor) are preset into
each selection (BAND1 LEVEL to BAND5 LEVEL).
Adjusts the level to memorize for each source. (Before making an
adjustment, select the source you want to adjust.)
/ /
–8 to +8 (+6)
Adjusts the level to memorize for each source. (Before making an
–8 to +8 (+5)
adjustment, select the source you want to adjust.)
–8 to +8 (0)
.
.
Default: XX
:
ENGLISH
19