Honeywell TR21 Manual Del Usuario
Ocultar thumbs Ver también para TR21:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

TR21, TR22, TR23, and TR24 Wall Modules
GENERAL
The TR21, TR22, TR23, and TR24 are a family of direct wired
wall modules for use with:
— Honeywell Excel 800, 600, 500, 100, and 80 (all fully
programmable) controllers
— Excel 10 W7750, W7751
controllers
— W7761 Controller
— Spyder Unitary Controllers: PUL, PVL
— ComfortPoint LON Controllers: CP-UL, CP-VL
All models have a space temperature sensor. Some models
have a temperature dial for setpoint adjustment, L
bus jack, override (bypass) with LED, and fan switch. The
figure above shows the TR23 (left) and TR21 (right) models.
a
The TR21, TR22, TR23, and TR24 wall modules are not
compatible with W7751A,C,E,G Controllers.
a
, W7752, and W7753
W
ON
ORKS
FEATURES
The TR21, TR22, TR23, and TR24 family of wall modules
include:
• Models with setpoint adjustment.
• Models with occupied/unoccupied override (bypass)
with LED.
• Models with 3-position (auto/0/1) or 5-position
(auto/0/1/2/3 speed) fan switch.
• L
W
® bus jack on all models except the TR21
ON
ORKS
and TR21-A models.
• Operating range 45°F to 99°F (7°C to 37°C).
• Models (TR22 and TR23) with user-selectable
temperature setpoint dials in Fahrenheit, Celsius, and
Relative (- to +).
SPECIFICATIONS
Models: See Table 1 on page 2.
Construction: Two-piece construction, cover and internally
wired subbase. Field wiring 16 to 22 AWG (1.31-0.33 sq.
mm) connects to a terminal block in the subbase.
Mounting Options: All modules can be mounted on a
standard two by four inch junction box or on a 60 mm
diameter junction box.
Dimensions (H/W/D): See Fig. 2 on page 3.
Environmental Ratings:
• Operating Temperature: 45°F to 99°F (7°C to 37°C).
• Shipping Temperature: -40°F to 150°F (-40°C to 65.5°C).
• Relative Humidity: 5% to 95% non condensing.
Humidity Output Accuracy: ±5% from 20–80% RH
Temperature Sensor Operating Range:
45°F to 99°F (7°C to 37°C).
®
Temperature Setpoint Ranges (TR22 and TR23 only):
The setpoint range is determined by the temperature knob
installed:
• 55°F to 85°F
• 13°C to 29°C
• Relative (- to +)
SPECIFICATION DATA
63-1321ES-06

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Honeywell TR21

  • Página 1 60 mm diameter junction box. The TR21, TR22, TR23, and TR24 are a family of direct wired Dimensions (H/W/D): See Fig. 2 on page 3. wall modules for use with: —...
  • Página 2: Temperature Sensor

    TEMPERATURE (DEGREES) M5874A (±0.2°C). Fig. 1. Temperature vs. resistance for nonlinear sensor. NOTE: The TR21-A wall module model has two 20K Ohm non-linear NTC temperature sensors in parallel, Wall Module Features which provide 10K NTC temperature sensing necessary for averaging.
  • Página 3 Fig. 2. Wall module dimensions in inches (mm). Circuit Board Fig. 3 illustrates the location of the terminal block and other features on the TR21, TR22, TR23, and TR24 models’ circuit board. Table 2 on page 4 describes the terminal connections by model number.
  • Página 4 OVERRIDE FACTORY USE ONLY. DO NOT ATTEMPT TO ADJUST. (BYPASS) PUSHBUTTON DIP SWITCH S1 IS USED FOR HUMIDITY MODELS (TR21-H AND TR23-H) ONLY. SECOND SWITCH (2) ON DIP SWITCH S2 IS FOR FACTORY USE ONLY. LONTALK CONNECTOR FAN SWITCH M28140 Fig.
  • Página 5 TR21, TR22, TR23, AND TR24 WALL MODULES Table 2. TR21, TR22, TR23, and TR24 Wall Module Terminal Connections. (Continued) Terminal Usage and Number (See Fig. 3 on page 4) When 18-24 SETPT Override Override Wall Used With Sensor (Setpoint) Return...
  • Página 6 See Fig. 3 on page 4 for location of these DIP switches. To set 85°F (29°C) 0.43 V these DIP switches, refer to the TR21, TR22, TR23, and TR24 Wall Modules – Installation Instructions, form 62-0267. Table 4. Wall Module Setpoint Configuration.
  • Página 7 Comment When Used With T7350 Thermostat: Auto 11.861K ±119 Left most position TR21, TR21-A, TR21-H, TR22, TR23, and TR24 are the 12.686K ±127 Fan Off position models compatible with the T7350 thermostat. When using 13.866K ±139 with the T7350 thermostat be sure to use the relative +/- offset knob only.
  • Página 8 TR21, TR22, TR23, AND TR24 WALL MODULES Automation and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9 customer.honeywell.com ® U.S. Registered Trademark © 2009 Honeywell International Inc.
  • Página 9: Características

    Módulos de pared TR21, TR22, TR23, y TR24 ESPECIFICACIONES CARACTERÍSTICAS La familia de modelos de pared TR21, TR22, TR23, y TR24 incluye: • Modelos con punto de ajuste. • Modelos con anulación manual (derivación) ocupado/ sin ocupar con LED. • Modelos con interruptor de ventilador de 3 posiciones (auto/0/1) o 5 posiciones de velocidad (auto/0/1/2/3).
  • Página 10: Sensor De Temperatura

    NTC no lineales de 20K Ohm en La Tabla 1 ilustra las características de los módulos de pared paralelo, los cuales proporcionan la detección de TR21, TR22, TR23, y TR24 e indica los modelos actuales de temperatura NTC 10K necesaria para promediar. Honeywell que reemplazan.
  • Página 11: Dimensiones Del Módulo

    Circuito Impreso La Fig. 3 ilustra la ubicación del bloque terminal y otras características de los circuitos impresos de los modelos TR21, TR22, TR23, y TR24. La Tabla 2 en la página 4 describe las conexiones terminales por número de modelo.
  • Página 12 INTERRUPTOR DE VENTILADOR MS28140 Fig. 3. Componentes del circuito impreso del módulo de pared. Tabla 2. Conexiones del terminal de los módulos de pared TR21, TR22, TR23, y TR24. Utilización del terminal y número (Ver Fig. 3 en la página 3) Restitu-...
  • Página 13 MÓDULOS DE PARED TR21, TR22, TR23, Y TR24 Tabla 2. Conexiones del terminal de los módulos de pared TR21, TR22, TR23, y TR24. (Continued) Utilización del terminal y número (Ver Fig. 3 en la página 3) Restitu- Anula- SETPT ción de la Restitu- ción...
  • Página 14: Comunicaciones

    Refiérase a la Fig. 3 en la página 4 para la ubicación de estos desde 70°F interruptores DIP. Para configurar estos interruptores DIP, refiérase a los módulos de pared TR21, TR22, TR23, y TR24 Desfase de +9°F 1426 - Instrucciones de instalación, forma 62-0267.
  • Página 15 Función remota generada desde la red. Cuando se Utiliza con el Termostato T7350: TR21, TR21-A, TR21-H, TR22, TR23, y TR24 son los modelos compatibles con el termostato T7350. Cuando se utiliza con el termostato T7350 asegúrese de utilizar la perilla de desplazamiento relativa +/- únicamente.
  • Página 16 ® y el logo LonMark son marcas registradas de LonMark Association. By using this Honeywell literature, you agree that Honeywell will have no liability for any damages arising out of your use or modification to, the literature. You will defend and indemnify Honeywell, its affiliates and subsidiaries, from and against any liability, cost, or damages, including attorneys’...

Tabla de contenido