Installing In Vehicles; Mount To Windshield - GiiNii GD-160 Manual De Usuario

2.2 Installing in Vehicles

2.2.1 Mount to Windshield

1. Attach the bracket to the device.
Rotate it into the bracket holder until you fell tight.
2. With the suction-cup laying flat, position the suction-cup on the windshield.
3. Hold the base firmly on the windshield and press down the clamp to mount the car holder to the
windshield. Make sure the base is securely locked in place.
Warning: Do not install the device on a tinted window. Doing so may damage the tint film.
8