Unit Overview and Operations
Place the desired material between the heating plates. Now press and
hold the "press" key. The machine starts to close slowly. To interrupt the
process, simply release the "press" key. The machine stops the closing
process immediately. To open the plates completely again, press the
"release" key.
8. Now press the setting key again to save all settings
of the control panel. The heating symbols are shown
in the display until the set temperature of the plates
is reached.
9. Wait until the plates have reached the desired
temperature and the heating symbols have
disappeared.
10. press the timer key. The countdown starts
immediately with the previously set time.
The remaining time is displayed on the "S" line of the
control panel.
Page 26.2