Assembly - Husqvarna H242SL El Manual Del Propietario

1
BAGGER SUPPORT ASSEMBLY
(See Figs. 1A & 1B)
Your tractor already has four (4) shoulder bolts installed
on the rear drawbar, simply hang the support assembly
on the bolts.
SUPPORT

ASSEMBLY

TO REMOVE THE SUPPORT ASSEMBLY (See Fig. 1B)
1. Pull outward on the stop bracket enough to allow support
assembly to be lifted up and away from drawbar.
ASSEMBLY
SHOULDER
BOLTS
FIG. 1A
PULL OUT ON STOP BRACKET TO
REMOVE SUPPORT ASSEMBLY
02643
FIG. 1B
2
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY (See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
to tractor.
1. Lift and rotate cover to align cover bracket with support
assembly.
2. Slide cover assembly down onto the support
assembly.
COVER
ASSEMBLY
5
SUPPORT
ASSEMBLY
02646_r1
FIG. 2