Yealink SIP-T19 E2 Guia De Inicio Rapido página 9

Call Mute and Un-mute
 Press to mute the microphone during a call.
 Press again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press the Hold soft key during an active call.
To resume the call, do one of the following:
 If there is only one call on hold, press the Resume soft key.
 If there is more than one call on hold, press
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press or the Tran soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press or the Tran soft key.
Semi-Attended Transfer
1. Press or the Tran soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press or the Tran soft key when you hear the ring-back tone.
Attended Transfer
1. Press or the Tran soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press or the Tran soft key when the second party answers.
Call Forward
To enable call forward:
1. Press the Menu soft key when the phone is idle, and then select Features-> Call Forward.
2. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For No Answer Forward, press
forwarding from the After Ring Time field.
4. Press the Save soft key to accept the change.
Call Conference
1. Press the NewCall soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conf soft key when the second party answers. All parties are now joined in the conference.
4. Press the EndCall soft key to disconnect all parties.
Note: You can split the conference call into two individual calls by pressing the Split soft key.
or to select the desired call, and then press the Resume soft key.
.
.
or to select the desired ring time to wait before
E
N
G
L
I
S
H
5