Cleaning And Maintenance - Domo DO7325F Manual De Instrucciones

object that is obstructing the grids. Then switch it back on as described above. The appliance should
operate normally. Should the problem persist, please contact the nearest customer service.
· The appliance is also equipped with a tip-over safety, which is integrated in the appliance. The
appliance will turn off when it tips over.

CLEANING AND MAINTENANCE

· Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down
completely.
· To avoid the risk of electric shock, do not clean the heater with water and do not immerse it. Clean the
housing with a damp cloth.
· If necessary, dust particles accumulated in the air outlet openings may be removed with a vacuum
cleaner. This maintenance should be done regularly to assure the good operation of the appliance.
Dust particles in the appliance may cause over-heating.
· Allow the unit to cool down completely before storing it.
· Store the appliance in a clean and dry place.
· You can easily move the device thanks to the handles.
SPECIFICATIONS
Model identifier(s): DO7325F
Item
Heat output
Nominal heat output
Minimum heat output
(indicative)
Maximum continuous
heat output
Auxiliary electricity
consumption
At nominal heat
output
At minimum heat
output
In standby mode
22
DO7325F
Symbol Value Unit
Pnom 1,86 kW
Pmin 0,956 kW
Pmax 1,86 kW
--- --- ---
elmax N/A kW
elmin N/A kW
elSB 0,0 KW
Item
Type of heat input, for electric storage
local space heaters only
manual heat charge control,
with integrated thermostat
manual heat charge control
with room and/or outdoor
temperature feedback
electronic heat charge control
with room and/or outdoor
temperature feedback
fan assisted heat output
Type of heat output/room temperature
control
single stage heat output and
no room temperature control
Two or more manual stages,
no room temperature control
with mechanic thermostat
room temperature control
with electronic room
temperature control
Unit
N/A
N/A
N/A
N/A
N/A
N/A
Yes
N/A